The horizontal power transmission occurs via three pressing bars . A fourth pair can be added. Special supports can be used to press carcasses with plinth adapters.
Case Clamps
CABTEQ T-200
The vertical pressing pressure is applied via the top pressure beam. The top pressure is balanced electrically. Clean fixing of the rear panel by fixing furniture parts to the top pressure using vacuum suction . Long sides are kept in balance.
Flexible pressing technology in a throughfeed process
Even for delicate or thin-walled cabinets, high-quality or miter furniture - the electric throughfeed case clamp CABTEQ T-200 automatically presses every cabinet gently and with a high level of quality. The result is perfectly rightangled, stable and cleanly pressed cabinets. The electric throughfeed case clamp is ideally suited for use as an individual machine or in production lines, in series production, small-batch production and batch size 1 production. Ergonomic aids (optional) also simplify the assembly process.
Features
Precisely adjustable pressing force allows cabinets with delicate surfaces, thin walls and small cabinets to be pressed.
Pressing is carried out centrally at the zero line on the operator side, meaning that the cabinet can always be freely accessed by the operator.
Precise ball screw drives with servo technology ensure accurate and fully automatic adjustment to different production parameters.
Electrical rather than pneumatic counterbalancing of the press top roll pressure unit enables energy savings of up to 50 percent.
Technical data
| Carcass dimensions | |
| Length in the pressing room [mm] | 250 - 2,500 250 - 3,100 |
| Depth in the pressing room [mm] | 120 - 800 120 - 1,000 |
| Height in the pressing room [mm] | 220 - 1,320 |
| Pressure | |
| vertikal [kN] | max. 30 |
| horizontal [kN] | max. 15 |
| Feed speed Transports [m/min] | 12 - 40 |
| Working height [mm] | 500 |
| Weight [t] | 5.0 - 6.0 |
| Operating pressure [bar] | 6 |
| Transport interface | yes |
| Control | powerTouch |
(Previous product name: Electric throughfeed case clamp MDE 120)
Software
materialManager
- All material data and stocks managed clearly in just one digital application
- Central material management in the company
- Integrated use of material data
serviceRemote
- Fast and targeted remote maintenance
- tapio connection enables faster analysis and resumption of production
- Proactive fault detection and maintenance through predictive maintenance technology
ServiceBoard
- Easy machine service
- Rapid creation of service tickets
- Overview of all service cases
serviceAssist
- Fast and independent troubleshooting
- Comprehensive maintenance and spare parts overview
- Direct contact with service
Product comparison
Case clamps
 |  |  |  |  | |
|---|---|---|---|---|---|
| CABTEQ S-200 | CABTEQ S-250 | CABTEQ T-200 | CABTEQ T-250 | CABTEQ T-500 | |
| Cabinet dimensions [mm] Cabinet length Cabinet width Cabinet height | 150 - 2.500 150 - 1.400 250 - 700 | 150 - 2.500 (3.000) 150 - 1.400 250 - 700 (900) | 250 - 2.500 (3.100) 220 - 1.320 (1.620) 120 - 800 (1.000) | 250 - 2.500 (3.100) 220 - 1.320 120 - 800 (1.000) | 300 - 2.500 300 - 1.200 250 - 800 |
| Pressing pressure [kN] vertical horizontal | max. 12 - 18 max. 12 - 18 | max. 12 - 18 max. 12 - 18 | max. 30 max. 15 | max. 30 max. 15 | max. 30 - |
| Processing height [mm] | 300 | 500 | 500 | 500 | 500 |
| Weight [t] | ca. 2,2 | ca. 2,2 | 5,0 - 6,0 | 6,0 | 7,0 |
| Positioning speed [mm/s] Rapid speed Slow speed | 50 25 | 50 25 | - - | - - | - - |
| Transports feed [m/min.] | - | - | 12 - 40 | 12 - 40 | - |
| Operating pressure [bar] | - | 6 | 6 | 6 | 6 |
| Details | Details | Details | Details | Details |
* depends on the workpiece thickness