Workpiece infeed systems
Workpiece infeed systems feed your workpieces to the edge processing machine automatically and precisely. They thus create the basis for high processing quality and efficient processing.
Show moreEdgebanders and Edge banding machines
EDGETEQ S-500 Optimat | profiLine
One machine. Unlimited possibilities
The single-sided EDGETEQ S-500 machines offer precise gluing and perfect post-processing of edges. PUR and airTec can be used if required. The feed rate can be set to 16-20, 25 or 35 m/min, enabling productivity to keep up with demand at woodworking shops or businesses with higher performance requirements. Automation and further functionality can be added on an individual basis for these edge banding machines.
Highlights
- Optimal processing quality with the FK30 profile trimming unit. The motion sequence is controlled by linear motors. The high acceleration of the linear motors when rounding the edge enables optimal processing quality.
- Intuitive touch operation. Control machine functions directly via woodCommander using the multi-touch, widescreen monitor. The ergonomic design as well as numerous help and assistant functions take ease of operation to the next level.
- Controlled chip collection. The chips are suctioned off in the interior and fed to the extraction hood in a targeted manner. Reduced wear and tear and lower service costs increase profitability and service life. The reduced suction speed lowers energy consumption and costs.
Features
-
woodCommander 6: Software for quick selection of the processing programs and the edge material
-
The multi-profile technology can be used to automatically switch between profiles and a chamfer. In addition to short setup times, you can achieve reproducible quality at the highest level.
-
Processing of rolls of material up to 3 mm, of strips up to 12 mm alternative of solid strips up to 20 mm
-
Workpieces with protective film/high gloss: For perfect high-gloss parts, important components such as the motorized top roll pressure element and the automatic adjustment of the glue joint scraper come into play.
-
Workpieces with hinge holes (nesting process) or pointed/blunt-angled parts: Depending on the unit configuration, different tracing elements are installed. They are ideal for processing parts with hinge holes, such as those produced in nesting, as well as pointed or blunt-angled parts.
-
With the narrow parts package, particularly narrow workpieces up to 40 mm can be processed precisely
Low energy costs plus material savings with ecoPlus
Technical data
|
EDGETEQ S-500 |
|
|---|---|
| Feed speed adjustable [m/min] |
16 - 20 (25, 30, 35) |
|
Workpiece width [mm] * with workpiece thickness 8 - 22 mm |
60 (40) |
| Workpiece thickness [mm] |
8 - 60 / 12 - 60 (8 - 100) |
| Edge thickness, coils [mm] |
0.3 - 3 |
| Edge thickness, strips / solid wood strips [mm] |
0.3 - 12 (20) |
* dependent on the workpiece thickness
Automation
Zero joint technology with airTec
In the airTec process, the edge and panel are bonded using hot air. This requires the use of special edges. These consist of a decorative layer and a functional layer. Using the HOMAG airTec unit, the functional layer is melted at a constant temperature and volume outflow and optimally applied to the narrow workpiece face.
LOOPTEQ O-300
For a wide spectrum in the material flow
LOOPTEQ O-400
Return on investment. literally.
LOOPTEQ O-600
More flexibility for the material flow
EDGETEQ XES 200
The all-rounder that complements your edge banding machine for easy processing of PUR glue
Software
Edgeband Management Set: The edgeband assistant
- The edge material and all related information at a glance
- Clear management and unique identification of edges in the rack (incl. residual lengths)
- Reduced setup times thanks to faster edge changes
woodCommander
- HOMAG Select
- Simple user interface
- Allocate edge material
materialManager
- All material data and stocks managed clearly in just one digital application
- Central material management in the company
- Integrated use of material data
Product comparison
Edge banding machine
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|
| EDGETEQ S-200 | EDGETEQ S-240 | EDGETEQ S-300 | EDGETEQ S-380 | profiLine | EDGETEQ S-500 Optimat | profiLine | |
| Feed rate adjustable [m/min] | 8-11 | 11 | 8-14 | 8-20 | 16-20 (25, 30, 35) |
| Workpiece width min. [mm]* in case of thickness 8-22 mm |
70 | 70 | 70 | 70 | 60 |
| Workpiece thickness [mm] | 8-60 | 8-60 | 8-60 | 8-60 | 8-60 |
| Edge thickness coils [mm] | 0,3-3 | 0,3-3 | 0,3-3 | 0,3-3 | 0,3-3 |
| Edge thickness strips / solid strips [mm] | 0,3-3 | 0,4-6 | 0,4-8 | 0,4-15 | 0,3-12 (20) |
| Details | Details | Details | Details | Details |
* depends on the workpiece thickness