Edgebanders and Edge banding machines
EDGETEQ S-810/CF
Complete processing of shaped parts in a single run
Rectangular workpieces are quickly turned into attractive contoured furniture parts in a throughfeed process without the need for manual post-processing. The EDGETEQ S-810/CF impresses with exceptional productivity, rapid gluing and precise processing, and with short setup times, our shaped part throughfeed machines are a profitable choice even for small series production. As batch sizes increase, cost efficiency compared to processing centers also improves.
Features
Precise linear drive for the transport chain-with a feed speed of up to 30 m/min-for an exceptionally clean trimming pattern
Contour trimming with no edge: Trimming of workpiece contours is CNC-controlled. Undercut trimming is possible
Contour trimming with edge banding: Following CNC-controlled trimming, plastic or veneer edges can be glued for many contours.
Maximum contour depth = 400 mm, maximum contour incline = 45°, minimum contour outer radius = 20 mmpowerTouch control system with clear, user-friendly interface
Creation of contours using woodWOP
Technical data
EDGETEQ S-810/CF | |
|---|---|
| Workpiece width [mm] (without back-pressure) | 150 + contour depth |
| Workpiece thickness [mm] | 12-40 |
| Workpiece length [mm] | min. 250 |
| Contour depth [mm] | max. 250 |
| Angle of inclination of contour | max. 45° |
| External radius of contour [mm] | min. 20 |
| Feed speed [m/min] | 6-30 |
(Previous product name: Shaped part throughfeed machines K 610/CF)