Maximum automation and technical availability of the robot minimizes downtimes and increases the added value of the machines.
Handling and storage systems timber construction
FEEDBOT F-500
High level of flexibility in production: Depending on the element, the studs are inserted transverse, longitudinally or diagonally.
Short cycle times: The robot inserts the wood into the frame work at a speed of up to six cycles per minute.
Robot management in frame work production
Availability of approximately 100%, high repeat accuracy and high-precision material handling: robots are reliable partners and increase the cost-effectiveness of wood work production automatically. In combination with the frame work station, the robot allows studs and plates for wall elements with windows and doors or special elements such as gables to be inserted fully automatically. Regardless of whether it's standard and special studs or the top and bottom plate, the robot inserts a wide variety of studs into the frame work automatically and with high precision. In this process, the six-axis robot transports stud weights of up to 75 kg without any problems.
Features
Six-axis robot as the central element of the frame work station
The robot is actuated via a wup data record
Multiple provision slots can be served
Various approach programs for different woods
Wood picked up quickly thanks to robot grippers with compressed air or servo motors
Automatic calculation of the retrieval and depositing positions (part weight, installation position and installation routine are included in the calculation)
Fully automatic insertion of wood in the frame work: depending on the stud and element, insertion is transverse, longitudinal or diagonal
- Plates (top and bottom plates)
- Processed and unprocessed studs (standard studs and special studs)
Robot inserts wood at a speed of up to six cycles per minute
Quiet, energy-efficient handling as energy is consumed only when a part is moved
Technical data
| Workpiece dimensions | |
| Workpiece length [mm] | 780 - 3,500 |
| Cross-section [mm] | min. 40 x 100 max. 160 x 250 |
| Workpiece weight [kg] | max. 75 |
